How to install the power meter battery
To install the battery for the power meter, follow these steps:Remove the rubber cap that seals the battery1.Take out the empty battery and insert a new Type CR2450 battery, ensuring the correct polarity1.For specific models like the Rival AXS power meter, the battery is user-replaceable and located within the DUB spindle of the crank assembly2.Make sure to consult your power meter's manual for any model-specific instructions. [pdf]
FAQS about How to install the power meter battery
How many batteries does a stages power meter need?
Each Stages Power meter requires one (1) CR2032 battery (included). The battery installation procedure is different for the right and left-side power meters. Left: Stages Power L Battery Installation. Right: Stages Power R Battery Installation. © Stages Cycling, LLC 2024. All Rights Reserved. Proudly Designed in Colorado
How do I install a spider based power meter?
The spider-based power meters attach to AXS cranksets using a simple 8-bolt interface. To install one, remove your driveside crank arm using a hex wrench long enough to apply the 54 Nm of force required to back out the fixing bolt. Then remove the eight Torx T20 bolts that attach the crank spider or chainring assembly to the crank.
When does the power meter turn on?
The power meter automatically turns on when the crank arms are rotated, and shuts off after 10 minutes of inactivity. The LED status indicator will blink green or red to indicate battery life. Replace the battery when no LED status indicator turns on.
How do I connect my power meter to my phone?
Enable Bluetooth in your phone settings for the app, and then connect to your power meter. Spider-based power meters use Magic Zero technology to automatically calibrate the power meter for you, so you never need to worry about calibration!
Where is the battery located on the rival AXS power meter?
The AAA lithium battery used by the Rival AXS power meter is user-replaceable and contained within the DUB spindle of the crank assembly, accessible from the non-drive side (left from the riding perspective). See the "DUB-PWR Battery Replacement" section of the SRAM Power Meter user manual for full instructions. Have more questions?
How do I zero a power meter?
23 Perform the Manual Zero with the rider off the bike and the drive side crank arm at 6 o'clock, then use your device's “Calibrate” command to zero the power meter. The power meter will return the Zero Offset value to the cycling computer.
Contact Us
We are deeply committed to excellence in all our endeavors.
Since we maintain control over our products, our customers can be assured of nothing but the best quality at all times.